Heidi loves a long train. She doesn't love dragging it through mud at a Ren Faire or having it stepped on in a convention crowd. Her solution is hidden bustle ties: ribbons sewn inside the skirt that lift the train up in seconds. Her bustle-ties video is one of her most saved, because once you've seen it you'll want it on every skirt you own.
How Bustle Ties Work
Pairs of ribbons are sewn to the inside (underside) of the skirt: one ribbon of each pair at a point higher up the back, one at a point lower down on the train. Tie each pair together and the lower point is pulled up to the higher one, gathering the train into soft swags. Untie them and the train falls back down. From the outside, the ties are invisible.
What You Need
- Ribbon or twill tape, about 1/4 to 1/2 inch wide, in a color matching the lining (6–10 pieces, 8–12 inches each).
- Matching thread and a hand-sewing needle.
- Safety pins and a friend or a dress form for testing.
Step by Step
- Put the skirt on (or on a dress form) over the same layers you'll wear with it.
- Find the lift points. Working from the inside of the skirt, pinch a point on the train and pin it up to a point higher on the back seam or side-back seams until the hem clears the floor. Usually 2–4 pairs work: one at center back and one or two at each side-back.
- Test-walk. Walk, turn and sit with the pins in. Adjust until the train is even and off the ground.
- Mark both points of every pair with chalk or a safety pin, then remove the pins.
- Sew the ribbons to the marked points on the inside, stitching through the seam allowance or lining only, so no stitches show on the outside. Fold the ribbon end under and stitch a small square for strength.
- Label the pairs. Use matching ribbon colors per pair, or a small numbered tag, so you can tie them quickly.
Tips
- Sew into seams or seam allowances where the skirt is strongest, not into a single layer of delicate fabric.
- Heavy skirts need more ties to spread the weight.
- Combine with a convertible design: Heidi's transforming skirt goes from dramatic train to walking length with one hidden ribbon.
- Practice tying them behind you, or give a helper a 30-second lesson.
Frequently Asked Questions
Ribbons sewn inside a skirt in pairs. Tying each pair lifts a lower point of the train up to a higher point, raising the train off the ground.
Not if they're stitched only into the lining or seam allowances. From the outside you see soft swags of fabric.
Usually 2–4 pairs, at center back and side-backs. Heavier or longer trains need more.
Keep going with Heidi
Short, practical videos on corsets, gowns and cosplay construction.
Subscribe on YouTubeJoin Heidi's Patreon as a free member to get new guides, build updates and behind-the-scenes posts by email. No payment needed.
Join free on PatreonFull photosets, build documentation and behind-the-scenes from the sewing studio for members, from $6/month.
See the full sets on Patreon